Dataman 40Pro Universal ISP Programmer
Universal 40-pin chip programmer with ISP capabilities and USB 2.0 connectivity. Dataman 40Pro is a small, fast and powerful programmer supporting over 39,000 programmable devices.
The 40Pro is built to meet the demands of development labs and field engineers for universal and portable programming.
General
- 40 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
- The programmer performs device insertion tests and contact checks before it programs each device. These capabilities, supported by signature-byte check help prevent chip damage due to operator error.
- 40Pro programmer performs programming verifications at the marginal level of supply voltage, which improves programming yield, and guarantees long data retention.
- Various socket converters are available to handle device in PLCC, SOIC, SSOP, TSOP, TSSOP, TQFP, QFN (MLF) and other packages.
Programmer Specification
Base Unit (DAC)
- Two D/A converters for VCCP and VPP, controllable rise and fall time
- VCCP range 2V..7V/350mA
- VPP range 2V..25V/200mA
- USB 2.0/1.1 compatible interface
- Selftest capability
ZIF Socket
- 40-pin DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up to 40-pins
- Pindriver: 40 TTL pindrivers, specialised GND/VCC/VPP pindriver
- FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins; level H selectable from 1.8V up to 5V
- Continuity test: each pin is tested before every programming operation
ISP Connector
- 10-pin male type with miss insertion lock
- 5 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V up to 5V to handle all (low-voltage including) devices.
- 1x VCCP voltage (range 2V..7V/100mA) (*1) and 1x VPP voltage (range 2V..25V/50mA)
- Programmed chip voltage (VCCP) with both source/sink capability and voltage sense
User Interface
- Programmer is driven by an easy-to-use control program with pull-down menus, hot keys and on-line help. Selecting of the device is performed by class, manufacturer or simply by typing a fragment of vendor name and/or part number.
- Standard device-related commands (read, blank check, program, verify, erase) are enhanced by some test functions (insertion test, signature-byte check), and some special functions (autoincrement).
- All known data formats are supported. Automatic file format detection and conversion during loading of file.
- The versatile auto-increment function allows each programmed device to be assigned an individual or incrementing serial number. This function also enables the operator to read serial numbers or device identification signatures from a file.
- The software also provides extensive information about programmable devices including detailed drawings of all available packages. The software also provides explanations of chip labelling (prefixes and suffixes) for each of the supported chips.
- The software provides full information for ISP implementation: Description of ISP connector pins for the currently selected chip, recommended target design around in-circuit programmed chip and other necessary information.
- Keeping your programmer software up to date can be a costly business with some programmers. Dataman offers completely FREE software updates whenever you need them. The latest software is always available from our website.
Device Support
The Dataman 40Pro supports over 39,000 of the most popular devices in use today - with future devices being added monthly. Dataman 40Pro coverage includes the following device types:
ZIF Socket
- EPROM: NMOS/CMOS, 27xxx and 27Cxxx series, with 8/16 bit data width, full support of LV series
- EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width, full support of LV series
- Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, with 8/16 bit data width, full support of LV series
- Serial E(E)PROM: 24Cxxx, 24Fxxx, 25Cxxx, 25Bxxx, 25Dxxx, 59Cxxx, 25Fxxx, 25Pxxx, 25Qxxx, 85xxx, 93Cxxx series, AT88SCxxx, full support for LV series
- Configuration (EE)PROM: XCFxxx, 37LVxx, XC17xxxx, EPCxxx, AT17xxx, LV series including
- NV RAM: Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2xxx, ZMD U63x series
- PLD: series: Atmel, AMD-Vantis, Cypress, ICT, Lattice, NS, ...
- Microcontrollers 51 series: 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, 89LSxxx, 89LPxxx, LPC series from Atmel, Atmel W&M, Intel, Philips, SST, Winbond
- Microcontrollers Atmel AVR: rady AT90Sxxxx, AT90pwm, AT90can, AT90usb, ATtiny, ATmega
- Microcontrollers Cypress: CY8Cxxxxx
- Microcontrollers ELAN: EM78Pxxx
- Microcontrollers EM Microelectronic: 4 and 8 bit series
- Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17Cxxx, PIC18xxx, dsPIC series, 8-40 pins
- Microcontrollers Scenix (Ubicom): SXxxx series
- Microcontrollers Silicon Laboratories(Cygnal): C8051 series
- Microcontrollers other: ASP, Macronix, Princeton, EXODUS Microelectronic, Goal, Ramtron, Topro, VersaChips, Winbond
ISP Connector
- Serial E(E)PROM: IIC series, MW series, SPI series, KEELOQ series, serial data Flash
- Microcontrollers Atmel AVR: AT89Sxxx, AT90Sxxxx, AT90pwm, AT90can, AT90usb, ATtiny, ATmega, AT89LSxxx, AT89LPxxx
- Microcontrollers Cypress: CY8C2xxxx
- Microcontrollers Elan: EM78Pxxx
- Microcontrollers EM Microelectronic: 4 and 8 bit series
- Microcontrollers Microchip PICmicro: PIC10xxx, PIC12xxx, PIC16xxx, PIC17xxx, PIC18xxx, dsPIC series
- Microcontrollers Philips: LPC series
- Microcontrollers Silicon Laboratories(Cygnal): C8051 series
| 40Pro | S6 | 48Pro2C | 48UXP | 48Pro2 | 48Pro2AP | |
| Type | ||||||
| Universal | • | • | • | • | • | • |
| Multi Socket | ||||||
| Stand-Alone | ||||||
| Specialised | ||||||
| Sockets | ||||||
| 1 x 40-pin | • | |||||
| 1 x 48-pin | • | • | • | • | • | |
| Socket Mechanism | ||||||
| Manual or 3rd Party Handler | • | • | • | • | • | • |
| Automatic by Built-In Actuators | ||||||
| Device Support | ||||||
| Number of Supported Devices | 39,000+ | 18,000+ | 132,000+ | 32,000+ | 133,000+ | 91,000+ |
| Low Voltage Support | • | • | • | • | • | • |
| High Current/Voltage Legacy Support | • | • | • | |||
| Features | ||||||
| Self Test | • | • | • | • | • | • |
| Insertion Test | • | • | • | • | • | • |
| ESD Protection | • | • | • | • | • | |
| ISP Capability | • | • | • | • | ||
| Multi-Programmer Capability | • | • | • | • | ||
| Interface to PC | ||||||
| USB | • | • | • | • | • | • |
| Parallel | • | • | ||||
| Power Supply | ||||||
| USB Powered | • | |||||
| Mains Powered | • | • | • | • | • | |
| O/S Support | ||||||
| Windows 7 | • | • | • | • | • | • |
| Windows 8 | • | • | • | • | • | • |
| Windows 10 | • | • | • | • | • | • |
| Windows 11 | • | • | • | • | • | • |
| Dimensions/Weight | ||||||
| Width (mm) | 160 | 136 | 195 | 310 | 195 | 88 |
| Depth (mm) | 95 | 90 | 140 | 170 | 140 | 205 |
| Height (mm) | 35 | 20 | 55 | 40 | 55 | 61 |
| Weight (Kg) | 0.5 | 0.3 | 0.9 | 1.9 | 0.9 | 1.1 |
| Warranty/Support | ||||||
| Parts and Labour (Years) | 3 | 3 | 3 | 3 | 3 | 3 |
| Life-Time Technical Support | • | • | • | • | • | • |
| Life-Time Software Updates | • | • | • | • | • | |
| Programming Speed (program/verify) | ||||||
| Microchip 24FC128 | 00:05.9 | 00:06.4 | 00:02.3 | n/a | 00:02.3 | 00:02.3 |
| ST M25P20 | 00:12.0 | 00:02.8 | 00:03.0 | n/a | 00:03.0 | 00:03.0 |
| Intel QB25F640S33 | 05:06.0 | 00:24.0 | 00:30.7 | 06:50.3 | 00:30.7 | 00:30.7 |
| SST SST39VF016Q | 04:40.0 | 00:11.1 | 00:40.8 | n/a | 00:40.8 | 00:40.8 |
| AMD Am29DL640G | 04:40.0 | 00:28.0 | 00:24.0 | 03:27.7 | 00:24.0 | 00:24.0 |
| Samsung K8P6415UQB | n/a | 00:10.8 | 00:13.0 | 03:33.5 | 00:13.0 | 00:13.0 |
| Samsung K9F1G08U0M | n/a | n/a | 02:02.7 | n/a | 02:02.7 | 02:02.7 |
| Microchip PIC18LF8720 | 00:18.7 | n/a | 00:11.0 | n/a | 00:11.0 | 00:11.0 |
| Atmel AT89C51RD2 | 00:18.0 | 00:14.4 | 00:14.4 | 00:19.2 | 00:14.4 | 00:14.4 |
- Dataman 40Pro Universal ISP Programmer
- Dimensions: 160 x 95 x 35mm (6.3 x 3.7 x 1.4inches)
- Weight: 0.5Kg (1.1lbs)
- Switching Power Adapter
- Operating voltage: 15-20V DC / max. 0.5A
- Power consumption: max. 6W active / approx. 1.4W sleep
- Power Cable
- Moulded USB Cable
- ISP Cable
- Diagnostic POD for selftest of the programmer
- Anti-dust cover for ZIF socket
- User Manual
- Software
- Compatible with Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows 8, Windows 10 and Windows 11
- Please see our Programmer System Requirements for more information
- Optional range of adapters and socket converters also available
The Dataman 40Pro portable programmer comes with:
- 30 Day Money Back Guarantee* - If you don't like it, send it back.
- Three Year Guarantee - Three years parts and labour warranty, on the 40Pro universal device programmer.
- Life-Time Technical Support - 40Pro technical support is available free via our website and telephone helpdesk for life.
- Life-Time Software Updates - 40Pro software updates are available free via our website for life.
*Applies to orders from UK/US offices only.
Main Screen
Device Selection
Device Information
View and Edit Buffer Memory
Device Operation Options
Device Programming / Verification
