Versions:
There are 4 models of the Dataman 48 universal programmer:
- 48 - No low voltage support
- 48LV - Low voltage support
- 48XP - Adds improved performance when programming high density FLASH parts, Windows
XP support, continued device support
-
48UXP - Latest and greatest; Adds USB connectivity, continued device support
Although the 48 and 48LV models are no longer supported the latest release of the
software v4.67 is still available
here. Both the 48 and 48LV are supported under this version of the software.
The only difference being that you cannot program any of the low voltage (LV) parts
if you have the 48.
Upgrades:
We offer two upgrade kits, the
LV upgrade kit and the
UXP upgrade kit. As you might expect the LV upgrade turns your 48 into
a 48LV and the UXP upgrade turns a 48LV into a 48UXP
The UXP upgrade kit can only be installed on a unit that is of the 48LV specification.
If you have a 48 (non LV) then you would require both upgrade kits to get you to
a 48UXP.
We offer these upgrade paths as an alternative to purchasing an entirely new programmer
each time a hardware upgrade is needed. Thus saving you money.
Software:
All versions of the software are available free from our website:
All versions of this software can be run without the hardware being connected to
the PC. The software will revert to demo mode in this situation and some of the
functions will not work for obvious reasons. Demo modes does let you select different
devices from the support list and view their configuration options. You can also
load files into the software and use the file handling options such as splitting
the file into odd and even bytes and saving the file as a different format. Demo
mode will give you a feel for the operation of the software before purchasing the
programmer.
 |
Before the new software is installed all existing software must be removed from the system. Please use the Add/Remove Programs feature found in Control Panel. Failure to do this may result in odd behaviour of the programmer and lead to failures in programmed devices.
All versions of this software must be run under the Administrator account when installed on Windows NT/2000/XP to function correctly. |
|
Updates:
The 48XP and 48UXP software is updated quarterly with added support of approximately
100 new devices with each update. As always these updates are available free from
our website.
back